wholesale disney jewelry Silver necklace becomes black and cleaned a little trick (how to clean the picture and text in detail)

Lucille

November 17, 2022 at 9:46 pm

skin diver jewelry wholesale
The use of baking soda instead of buying jewelry cleaning products! It is a mild cleaner, which is very suitable for cleaning various types of jewelry, including gold, silver, fake gold and silver plating. Make a paste with a baking soda, scrub the dirty fragments, or leave how many dirty pieces in the baking soda. For gold -plated jewelry, nickel -oped and sterling silver, please add salt and cleaner to clean it. All methods to use baking soda will make your jewelry shine and look like new.
Methods 1. Perform basic cleaning
1. Put a cup of hot water in a bowl. Choose a suitable size bowl for you to clean. Only about a cup of hot water can clean up most parts. Heat the water in the microwave oven for about 30 seconds or longer.
For example, if you want to clean the large paste, add a little more water.

2. Place one or two teaspoons of small soda. Spoon the spoon of a teaspoon and put it in a bowl and put it in a bowl. Then, stir them with a spoon to dissolve bicarbonate salt.
If it is difficult for you to mix bicarbonate with water, heated it in the microwave oven for about 30 seconds or longer.

3. Leave jewelry in a mixture for 5 to 10 minutes. Put the jewelry into a bowl with water and soda. This part must be completely immersed. Set a alarm clock within 5 to 10 minutes to make the baking effect. You can clean multiple jewelry at the same time.
The mixture of water and bicarbonate can remove the surface dirt and debris, so that all types of jewelry can be cleaned on the surface.

4. Rinse the part with cold water to remove the residual baking soda. After jewelry is soaked, it will be almost clean. Take it out of the bowl, pour the liquid into the sink drain pipe, and then wash the jewelry with cold water.
If you want to clean a small ring or earrings, put cold water in the bowl and put it in it. Therefore, they will not fall into your hands. If necessary, you can also use high -value jewelry to do this.

5. Dry the jewelry with a clean towel. After rinse jewelry, find a clean cloth or wipe off the excess water with a paper towel. Dry immediately to keep it in a good state.
In jewelry or put it in the jewelry box.

Methods 2. Remove stubborn dirt
1. Mix three soda with a water. Take a small plate and add three parts of the baking soda. Then add a part of the water to make a paste. The number of soda will depend on how many pieces you want to clean.
For example, mix three tablespoons of soda and a tablespoon of water to clean a few slices.
This is a good way to clear the residue in the very dirty or stained jewelry.
2. Mixed ingredients until it forms a paste. Mix water with soda with the back of the toothbrush. Stir until it forms a uniform paste. If it is difficult to move, add a few drops of water.
If you feel easier, please mix the two with a spoon.
3. Use a clean toothbrush to use a paste to make it use with bristles. Insert the brush into the paste to get enough amount and completely cover the need to clean. Try to pass the paste to all bristles.
If you need more baking soda, just immerse the brush into the paste again.
If toothbrush is inconvenient, please use a cotton swab. Do not use a dirty brush, otherwise it will damage jewelry and spread bacteria.
4. Wipe the jewelry gently with a brush. You can hold it in your hands or on a paper towel for cleaning. Put the hard hair of the brush on the jewelry and rub it a few times. Clean a jewelry at a time.
In order to get the best results, please use a soft brush. They can reach the corners and creases of the pendant, bracelets and rings.
5. Continue rubbing for one or two minutes to clean it. How long you need to rub depends on the size and dirty jewelry. Wipe straight until the stubborn dirt disappears.
In the effect of jewelry, please clean some paste and take a look.
6. Remove baking soda and dirt with cold water. After rubbing the jewelry, you can immerse them in a glass of water or put it under the faucet. Rinse the jewelry for 30 seconds or longer to clear the baking soda.
7. Put the jewelry on the towel to dry it. Stretch a towel near the sink and put it on the top after rinse. Put the jewelry on the towel for five to ten minutes to ensure that it is completely dry.
Methods III. Clean fake gold and silver head jewelry
1. Heat a glass of water in a microwave oven for one or two minutes. Pour about a glass of water into a safe bowl to transfer it to the microwave oven. Then put it in one or two minutes to heat the water
2. Put the aluminum foil in the bowl to check the small pieces. Cut a piece of aluminum foil into the size and shape of a bowl and use it as a lining in the bowl.
Ifly to clean large jewelry, no aluminum is needed. Its role is to not lose earrings and small pendants.
3. Put a spoonful of salt, one of the soda and detergent in the bowl. To make a cleaning mixture, put a tablespoon of salt, a small soda and a detergent in a bowl. Mix with a spoon.
This combination is very suitable for removing difficulty in processing waste.
4. Soak jewelry for 5 to 10 minutes. As long as they are completely immersed, you can put a few small jewelry in the bowl. If you want to disinfect small parts, put them on aluminum foil to avoid loss.
If need, please use the timer to know when to remove the jewelry.
5. Throw away the mixture and rinse jewelry. Water will remove all salt, soda or soap, and residual fragments that remain in the fragments.
Is when there are no bubbles or residues in the water, jewelry will be clean.
6. Wipe dry jewelry with cloth after soaking. Before wearing jewelry or storage for preparation, apply a clean towel to dry it on it. It can be cloth or paper towels.
The necessary materials
The baking baking baking paste
3 soda.
1 part of water.
B disc.
toothbrush.
Make jewelry in water with a baking soda
1 cup of hot water.
1-2 teaspoon baking soda.
bowls.
spoon.
The use of soap, salt and baking soda
microwave.
bowls.
1 cup of water.
1 tablespoon of salt.
1 tablespoon of baking soda.
1 tablespoon of detergent.
aluminum paper

1 thought on “wholesale disney jewelry Silver necklace becomes black and cleaned a little trick (how to clean the picture and text in detail)”

Lucille
November 17, 2022 at 9:46 pm

skin diver jewelry wholesale
The use of baking soda instead of buying jewelry cleaning products! It is a mild cleaner, which is very suitable for cleaning various types of jewelry, including gold, silver, fake gold and silver plating. Make a paste with a baking soda, scrub the dirty fragments, or leave how many dirty pieces in the baking soda. For gold -plated jewelry, nickel -oped and sterling silver, please add salt and cleaner to clean it. All methods to use baking soda will make your jewelry shine and look like new.
Methods 1. Perform basic cleaning
1. Put a cup of hot water in a bowl. Choose a suitable size bowl for you to clean. Only about a cup of hot water can clean up most parts. Heat the water in the microwave oven for about 30 seconds or longer.
For example, if you want to clean the large paste, add a little more water.

2. Place one or two teaspoons of small soda. Spoon the spoon of a teaspoon and put it in a bowl and put it in a bowl. Then, stir them with a spoon to dissolve bicarbonate salt.
If it is difficult for you to mix bicarbonate with water, heated it in the microwave oven for about 30 seconds or longer.

3. Leave jewelry in a mixture for 5 to 10 minutes. Put the jewelry into a bowl with water and soda. This part must be completely immersed. Set a alarm clock within 5 to 10 minutes to make the baking effect. You can clean multiple jewelry at the same time.
The mixture of water and bicarbonate can remove the surface dirt and debris, so that all types of jewelry can be cleaned on the surface.

4. Rinse the part with cold water to remove the residual baking soda. After jewelry is soaked, it will be almost clean. Take it out of the bowl, pour the liquid into the sink drain pipe, and then wash the jewelry with cold water.
If you want to clean a small ring or earrings, put cold water in the bowl and put it in it. Therefore, they will not fall into your hands. If necessary, you can also use high -value jewelry to do this.

5. Dry the jewelry with a clean towel. After rinse jewelry, find a clean cloth or wipe off the excess water with a paper towel. Dry immediately to keep it in a good state.
In jewelry or put it in the jewelry box.

Methods 2. Remove stubborn dirt
1. Mix three soda with a water. Take a small plate and add three parts of the baking soda. Then add a part of the water to make a paste. The number of soda will depend on how many pieces you want to clean.
For example, mix three tablespoons of soda and a tablespoon of water to clean a few slices.
This is a good way to clear the residue in the very dirty or stained jewelry.
2. Mixed ingredients until it forms a paste. Mix water with soda with the back of the toothbrush. Stir until it forms a uniform paste. If it is difficult to move, add a few drops of water.
If you feel easier, please mix the two with a spoon.
3. Use a clean toothbrush to use a paste to make it use with bristles. Insert the brush into the paste to get enough amount and completely cover the need to clean. Try to pass the paste to all bristles.
If you need more baking soda, just immerse the brush into the paste again.
If toothbrush is inconvenient, please use a cotton swab. Do not use a dirty brush, otherwise it will damage jewelry and spread bacteria.
4. Wipe the jewelry gently with a brush. You can hold it in your hands or on a paper towel for cleaning. Put the hard hair of the brush on the jewelry and rub it a few times. Clean a jewelry at a time.
In order to get the best results, please use a soft brush. They can reach the corners and creases of the pendant, bracelets and rings.
5. Continue rubbing for one or two minutes to clean it. How long you need to rub depends on the size and dirty jewelry. Wipe straight until the stubborn dirt disappears.
In the effect of jewelry, please clean some paste and take a look.
6. Remove baking soda and dirt with cold water. After rubbing the jewelry, you can immerse them in a glass of water or put it under the faucet. Rinse the jewelry for 30 seconds or longer to clear the baking soda.
7. Put the jewelry on the towel to dry it. Stretch a towel near the sink and put it on the top after rinse. Put the jewelry on the towel for five to ten minutes to ensure that it is completely dry.
Methods III. Clean fake gold and silver head jewelry
1. Heat a glass of water in a microwave oven for one or two minutes. Pour about a glass of water into a safe bowl to transfer it to the microwave oven. Then put it in one or two minutes to heat the water
2. Put the aluminum foil in the bowl to check the small pieces. Cut a piece of aluminum foil into the size and shape of a bowl and use it as a lining in the bowl.
Ifly to clean large jewelry, no aluminum is needed. Its role is to not lose earrings and small pendants.
3. Put a spoonful of salt, one of the soda and detergent in the bowl. To make a cleaning mixture, put a tablespoon of salt, a small soda and a detergent in a bowl. Mix with a spoon.
This combination is very suitable for removing difficulty in processing waste.
4. Soak jewelry for 5 to 10 minutes. As long as they are completely immersed, you can put a few small jewelry in the bowl. If you want to disinfect small parts, put them on aluminum foil to avoid loss.
If need, please use the timer to know when to remove the jewelry.
5. Throw away the mixture and rinse jewelry. Water will remove all salt, soda or soap, and residual fragments that remain in the fragments.
Is when there are no bubbles or residues in the water, jewelry will be clean.
6. Wipe dry jewelry with cloth after soaking. Before wearing jewelry or storage for preparation, apply a clean towel to dry it on it. It can be cloth or paper towels.
The necessary materials
The baking baking baking paste
3 soda.
1 part of water.
B disc.
toothbrush.
Make jewelry in water with a baking soda
1 cup of hot water.
1-2 teaspoon baking soda.
bowls.
spoon.
The use of soap, salt and baking soda
microwave.
bowls.
1 cup of water.
1 tablespoon of salt.
1 tablespoon of baking soda.
1 tablespoon of detergent.
aluminum paper

Log in to Reply

1 thought on “wholesale disney jewelry Silver necklace becomes black and cleaned a little trick (how to clean the picture and text in detail)”

Leave a Comment Cancel Reply