2 thoughts on “I am a CNC, hydraulic, electronic technology, and processing technology. What should I learn more about going out for maintenance and programming in the future?”
Leave a Comment
You must be logged in to post a comment.
You must be logged in to post a comment.
Student CNC, it is difficult to do with maintenance and programming. If you are programming, you must know very well for the processing process. What kind of materials, what procedures to prepare, what knife gear are used, what kind of knife path, etc., etc., etc., etc. Many of them need to be practiced to slowly experience it. As for the maintenance and processing center, you don't need to understand the processing process. Instead, electronic technology needs to know more. In particular Some mechanical failures can also be eliminated by experience. No matter what kind of choice, I hope you can do it well!
The hydraulic pressure is actually very useful. Cold and lubrication in CNC is the hydraulic system. Electronic technology is that you prepare for future learning and must be learned. The processing process is more applicable. In work, you can often use it. If you do repair, you first learn the professional courses. There are also PLC, C language, and machine tool electrical lines. You can better participate in the training of electrician and obtain a certificate. CNC programming is relatively simple. The programming of each person in the same part is different. It is flexibly used.